- Ensure tires are set to correct pressure. Perform alignment check to obtain initial measurements. Adjust caster, camber, and toe (as applicable) on both axles to manufacturer's specifications with steering wheel set straight. Calibrate steering angle sensor if needed. Perform test drive to ensure accuracy of alignment (repeat procedure if necessary).
- EXHAUST PIPE – Remove & Replace – 1.5L Eng One,Front
- WHEEL BEARING – Remove & Replace – Front,Hub & Bearing Assy,One Side – [Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable). Includes: Replace Seals and repack Bearings (where applicable).]
Larissa H. gave our service a 5 star review on 5/21/2020